22May More Zoom H1 shock mount spam.
Most of my week has been taken up with the Zoom H1
One of my goals on this project was to turn these into a cheap boom mic shock mount. If you place one of these at the front and back end of a Dzone2 Cold shoe bracket, you end up with a great boom mic shock mount adapter. If I can get enough of them made, maybe I could offer a 2 for $18 deal. Add that to the Cold shoe bracket ($10) and you end up with a $28 boom mic adapter.
I should have some more up on the site next week along with the Juicedlink DS214 adapters. Still waiting on parts, so I’ll keep you posted.
May 24th, 2011 at 9:13 pm
Where did you get that shotgun mic?
June 14th, 2011 at 5:32 pm
[…] quit a number of e-mails asking when the next round of Zoom H1 shock mounts and DS214 adapters will be available. In the picture above I’m holding the reason for my […]
September 12th, 2011 at 12:15 pm
Do you know if anyone has used the shockmount with the Olympus LS-10 or LS-11? I’m leaning towards that recorder for its more durable case and slightly higher audio quality.
February 20th, 2013 at 8:09 pm
Will it work with the tascam dr-05? Does the flash shoe tighten?
February 20th, 2013 at 8:40 pm
It works with the DR-05 and the shoe does not tighten.
April 29th, 2013 at 5:49 pm
Do you have a shockmount for the Tascam DR-40?
October 28th, 2013 at 9:01 am
Not sure if you’re trying to make money off these or not, but I suspect this isn’t a big money maker (if it were, I figure you’d do injection molding!). If not, I’d love to see the STL files, print it myself, and save on shipping!
November 14th, 2013 at 8:53 pm
Does good enough to go injection molding if I had the time to deal with the mold making process. I have a CNC table and injection mold system with hopper. I could go injection mold, but it’s much easier to use the 3d printers.
March 10th, 2015 at 8:52 am
Will either of your shock mounts work with the DR-22WL?